Search
Generic filters

Showing all 26 results

  • Cartridge Case Organizer II

    $25.43 holds 150 .308 Win. cases, works with all rifle and pistol cases from .40 S&W to and including .50 BMG?greatly aids in fast easy application of Tempilaq into case mouth. POST PAID.
  • Adhesive backed 1″ Square Rubber Pads

    $5.67 If ordered on an Anneal-Rite they are installed prior to mailing. If customer orders aftermarket just peel off the paper and paste on. 12 pads (shown in foreground on left) enough for an Anneal-Rite & bottle holders, this price is for the pads only, POST PAID.
  • One Bernz0matic pencil flame propane torch

    $25.52 This is the perfect torch for precision cartridge case neck annealing. FREE SHIPPING!
  • Two Bernz0matic pencil flame propane torches

    $47.87 Two Bernz0matic torches, these are the perfect choice for precision case neck annealing. FREE SHIPPING!
  • Plywood base 1ft X 2ft with three 1/4″ bolts

    $42.39 The plywood base pre-drilled with mounting holes properly located for installation of the Anneal-Rite. This makes it convenient eliminating setup time, Bolts, washers and wingnuts included. Anneal-Rite sold separately, FREE SHIPPING!
  • 3 Bolt package, for mounting Anneal-Rite onto a board

    $10.59 This package consists of three 1/4 X 20 carriage bolts 1 1/4" long, with wingnuts and washers. These are used for mounting the two propane bottle holder brackets and the Anneal-Rite stand onto a board. This eliminates setup keeping everything is precise orientation session to session. Drawing for bolt pattern layout included.
  • .22 Case Spinner, far left for .22 cases from 1.322″ to 2.5″ long.

    $23.00 .22 Case Spinner, far left for .22 cases from 1.322" to 2.5" long. Comes with a package of 10 spare O-rings included enough for thousands of cases. For the best fit advise us of the inside diameter of your fired case. DO NOT WRAP POLISHING MEDIA AROUND THE HAND, DO NOT USE GLOVES, GRIP CASES...
  • 6 mm (.243″) Case Spinner, second from left works with .243 cases from 1.400 to 2.360 inches long.

    $23.00 Comes with a package of 10 spare ?O? rings included enough for thousands of cases.. For the best fit advise us of the inside diameter of your fired case. DO NOT WRAP POSLIHING MEDIA AROUND THE HAND, DO NOT USE GLOVES, GRIP CASES WITH THE POLISHING MEDIA NOT THE BARE HAND. FREE SHIPPING!
  • .25 Case Spinner, third from left works with .25 cases from 1.456 to 2.500 inches long.

    $23.00 Comes with a package of 10 spare ?O? rings included enough for thousands of cases. For the best fit advise us of the inside diameter of your fired case. DO NOT WRAP POSLIHING MEDIA AROUND THE HAND, DO NOT USE GLOVES, GRIP CASES WITH THE POLISHING MEDIA NOT THE BARE HAND, POST PAID.
  • 6.5 mm (.264″) Case Spinner, fourth from left works with .264 cases from 1.350 to 2.472 inches long.

    $23.00 Comes with a package of 10 spare ?O? rings included enough for thousands of cases. For the best fit advise us of the inside diameter of your fired case. DO NOT WRAP POSLIHING MEDIA AROUND THE HAND, DO NOT USE GLOVES, GRIP CASES WITH THE POLISHING MEDIA NOT THE BARE HAND, POST PAID.
  • 7 mm (.284″) Case Spinner, fifth from left works with .284 cases from 1.350 to 2.402 inches long.

    $23.00 Comes with a package of 10 spare ?O? rings included enough for thousands of cases. For the best fit advise us of the inside diameter of your fired case. DO NOT WRAP POSLIHING MEDIA AROUND THE HAND, DO NOT USE GLOVES, GRIP CASES WITH THE POLISHING MEDIA NOT THE BARE HAND, POST PAID.
  • .308 Case Spinner, sixth from left works with .308 cases from 1.570 to 2.622 inches long.

    $23.00 Comes with a package of 10 spare ?O? rings included enough for thousands of cases. For the best fit advise us of the inside diameter of your fired case. DO NOT WRAP POSLIHING MEDIA AROUND THE HAND, DO NOT USE GLOVES, GRIP CASES WITH THE POLISHING MEDIA NOT THE BARE HAND, POST PAID.
  • .338 Case Spinner, 7th from L. for .338 cases from 1.662 to 2.750″ long.

    $23.00 Comes with a package of 10 spare ?O? rings included enough for thousands of cases. For the best fit advise us of the inside diameter of your fired case. DO NOT WRAP POSLIHING MEDIA AROUND THE HAND, DO NOT USE GLOVES, GRIP CASES WITH THE POLISHING MEDIA NOT THE BARE HAND, POST PAID.
  • .458 Case Spinner, far right for .458 cases from 1.572 to 2.700″ long.

    $23.00 Comes with a package of 10 spare ?O? rings included enough for thousands of cases. For the best fit advise us of the inside diameter of your fired case. DO NOT WRAP POSLIHING MEDIA AROUND THE HAND, DO NOT USE GLOVES, GRIP CASES WITH THE POLISHING MEDIA NOT THE BARE HAND, POST PAID.
  • .338 Sinclair bullet comparator 749-009-211

    $14.95 This is the favored instrument we use as it has a larger more stable base affording precision measurement. Use with bullets only or loaded ammunition. Hole cut with a throat reamer to accurately duplicate a rifle throat. Carefully drop a bullet or loaded round into the comparator then place on the granite surface of our...
  • 6mm Sinclair bullet comparator 749-009-212

    $14.95 This is the favored instrument we use as it has a larger more stable base affording precision measurement. Use with bullets only or loaded ammunition. Hole cut with a throat reamer to accurately duplicate a rifle throat. Carefully drop a bullet or loaded round into the comparator then place on the granite surface of our...
  • AR-15 CLEANING LINK Sinclair 749-002-497

    $19.98 This item is a must have for cleaning your AR-15. The Link separates the upper and lower assemblies, but holds them securely to allow easy breech access for bore cleaning using a Sinclair Rod Guide. Made of Delrin and stainless steel, it is virtually impervious to solvents. The Cleaning Link uses the rear locking pin...
  • Sinclair stainless steel 30- degree Bump Gage for .17 Fireball, .22/6mm PPC & BR, .204 Ruger.

    $13.99 Sinclair 749-011-484 stainless steel 30º Bump Gage for .17 Fireball, .22/6mm PPC & BR, .204 Ruger. Measure shoulder setback during resizing.  Bump gage works superbly with our Ultimate Cartridge Check System.  Recommended bump of .001 to .002 shoulder setback for bolt actin guns and .005 for Semi-Auto and other repeating actions SKU 25.000 POST PAID...
  • .22-250, .223 & .243 WSSMl Bump Gage Insert 28 Deg. Sinclair 749-011-472

    $13.99 Used to measure the amount of shoulder bump when setting up sizing die. Bump gage is the most accurate when used on the granite surface plate of our Ultimate Cartridge Check System. Recommended bump of .001 to .002 shoulder setback for bolt actin guns and .005 for Semi-Auto and other repeating actions. POST PAID. $13.99
  • .22 rimfire stainless steel headspace gage,

    $16.00 Many precision shooters find it helpful to sort their .22 rimfire ammunition into batches according to cartridges headspace variations. This gage can be used with a caliper, however for the most precise measurements use our Ultimate Cartridge Check System, it eliminates pressure variations opposed to using a caliper, POST PAID.
  • .45-70 stainless steel headspace gage

    $17.00 Many precision shooters find it helpful to sort their .45-70 cases into batches according to headspace variations. This gage can be used with a caliper, however for the most precise measurements use our Ultimate Cartridge Check System, it eliminates pressure variations opposed to using a caliper, POST PAID.
  • .45-90 Cartridge Case Headspace Gage

    $18.00 Many precision shooters find it helpful to sort their .45-90 cases into batches according to headspace variations. This gage can be used with a caliper, however for the most precise measurements use our Ultimate Cartridge Check System, it eliminates pressure variations opposed to using a caliper.
  • .45-100 Cartridge Case Headspace Gage

    $19.00 Many precision shooters find it helpful to sort their .45-100 cases into batches according to headspace variations. This gage can be used with a caliper, however for the most precise measurements use our Ultimate Cartridge Check System, it eliminates pressure variations opposed to using a caliper.
  • .45-110 Cartridge Case Headspace gage

    $20.00 Many precision shooters find it helpful to sort their .45-110 cases into batches according to headspace variations. This gage can be used with a caliper, however for the most precise measurements use our Ultimate Cartridge Check System, it eliminates pressure variations opposed to using a caliper.
  • .45-120 Cartridge Case Headspace gage

    $21.00 Many precision shooters find it helpful to sort their .45-70 cases into batches according to headspace variations. This gage can be used with a caliper, however for the most precise measurements use our Ultimate Cartridge Check System, it eliminates pressure variations opposed to using a caliper.
  • TOWING EQUIPMENT

    $475.00 Towing Equipment, complete rig, good used equipment needed to hookup a tow vehicle behind a tractor, truck or motor home. Includes a Roadmaster Tracker Tow bar. This gear cost $1,000.00 new. Price is FOB Fort Smith, AR it will be best for purchaser to take delivery at our location. Seller will assist in motor freight...